Flutter SDK v1

The RudderStack Flutter SDK lets you track event data from your Flutter applications and send it to your specified destinations via RudderStack.

Refer to the Flutter SDK GitHub Repository to get a more hands-on understanding of the SDK and the related codebase.

It is strongly recommended to update your Flutter SDK to the latest version to get all the features, including web support. Refer to the SDK documentation for more information.

SDK setup requirements

To set up the RudderStack Flutter SDK, you need the following prerequisites:

• You will need to set up a RudderStack Account.
• Once signed up, you need to set up a Flutter source in the dashboard. You should be able to see a Write Key for this source:

• You will also need a data plane URL. Refer to the Glossary for more information on the data plane URL and where to find it.
• It is also recommended to set up the Flutter development environment in your system.

Starting from v1.0.2, the RudderStack Flutter SDK is migrated to Null Safety.

Installing the RudderStack Flutter SDK

The recommended way to install the Flutter SDK is through pub.

Follow the steps below to add the SDK as a dependency:

1. Open pubspec.yaml and add rudder_sdk_flutter under dependencies section:

dependencies:
  rudder_sdk_flutter: ^1.2.0

2. Navigate to your application’s root folder and install all required dependencies with the following command:

flutter pub get

Initializing the RudderStack client

After adding the SDK as a dependency, you need to set up the SDK.

1. To import the SDK, use the following snippet:

import 'package:rudder_sdk_flutter/RudderClient.dart';
import 'package:rudder_sdk_flutter/RudderConfig.dart';
import 'package:rudder_sdk_flutter/RudderLogger.dart';

2. Then, add the following code snippet in your application:

final RudderController rudderClient = RudderController.instance;
RudderLogger.init(RudderLogger.VERBOSE);
RudderConfigBuilder builder = RudderConfigBuilder();
builder.withDataPlaneUrl(<DATA_PLANE_URL>);
builder.withTrackLifecycleEvents(true);
rudderClient.initialize(<WRITE_KEY>,config: builder.build());

The initialize method has the following signature:

Check the Configuring your RudderStack client section below for a complete list of the configurable parameters.

Configuring your RudderStack Client

You can configure your client based on the following parameters by passing them in the RudderConfigBuilder object of your rudderClient.initialize() call.

Identify

RudderStack captures deviceId and uses that as the anonymousId for identifying the user. This helps to track the users across the application installation. To attach more information to the user, you can use the identify method.

For a detailed explanation of the identify call, refer to the RudderStack API Specification.

Once a user is identified, the SDK persists all user information and passes it to the successive track or screen calls. To reset the user identification, you can use the reset method.

On the Android devices, the deviceId is assigned during the first boot. It remains consistent across the applications and installs. This can be changed only after a factory reset of the device.

According to the Apple documentation, if the iOS device has multiple apps from the same vendor, all apps will be assigned the same deviceId. If all applications from a vendor are uninstalled and then reinstalled, then they will be assigned a new deviceId.

A sample identify event is as shown:

RudderTraits traits = RudderTraits();
traits.putBirthdayDate(new DateTime.now());
traits.putEmail("abc@123.com");
traits.putFirstName("Alex");
traits.putLastName("Keener");
traits.putGender("M");
traits.putPhone("1234567890");

Address address = Address();
address.putCity("New Orleans");
address.putCountry("USA");
traits.putAddress(address);

traits.put("boolean", true);
traits.put("integer", 50);
traits.put("float", 120.4);
traits.put("long", 1234);
traits.put("string", "hello");
traits.put("date", new DateTime.now().millisecondsSinceEpoch);

rudderClient.identify("test_user_id", traits: traits, options: null);

The identify method has the following signature:

Obtaining user traits after making an identify call

You can obtain the user traits after making an identify call as shown:

Map context = await rudderClient.getRudderContext();
print(context["traits"]);

Track

You can record the users’ activity through the track method. Each user action is called an event.

For a detailed explanation of the track call, refer to the RudderStack API Specification.

A sample track event is shown below:

RudderProperty property = RudderProperty();
property.put("test_key_1", "test_key_1");
RudderProperty childProperty = RudderProperty();
childProperty.put("test_child_key_1", "test_child_value_1");
property.put("test_key_2",childProperty);
rudderClient.track("test_track_event", properties: property);

The track method has the following signature:

RudderStack automatically tracks the following optional application lifecycle events:

• Application Installed
• Application Updated
• Application Opened
• Application Backgrounded

You can disable these events by calling withTrackLifeCycleEvents(false) in the RudderConfigBuilder object while initializing the RudderStack client. However, it is highly recommended to keep them enabled.

Screen

You can use the screen call to record whenever the user views a screen on their mobile device along with the properties associated with that event.

For a detailed explanation of the screen call, refer to the RudderStack API Specification guide.

A sample screen event is as shown:

RudderProperty screenProperty = new RudderProperty();
screenProperty.put("foo", "bar");
rudderClient.screen("Main Activity",
    properties: screenProperty, options: null);

The screen method has the following signature:

Group

The group call associates a user to a specific organization.

For a detailed explanation of the group call, refer to the RudderStack Event Specification guide.

A sample group event is shown below:

RudderTraits groupTraits = RudderTraits();
groupTraits.put("foo", "bar");
groupTraits.put("foo1", "bar1");
rudderClient.group("sample_group_id",
    groupTraits: groupTraits, options: null);

The group method has the following signature:

RudderStack doesn’t persist the group traits across the sessions.

Alias

The alias call lets you merge different identities of a known user.

alias is an advanced method that lets you change the tracked user’s ID explicitly. This method is useful when managing identities for some of the downstream destinations.

For a detailed explanation of the alias call, refer to the RudderStack Event Specification guide.

A sample alias call is as shown:

rudderClient.alias("new_user_id", options: null);

The alias method has the following signature:

RudderStack replaces the old userId with the newUserId and persists this identification across the sessions.

Reset

You can use the reset method to clear the persisted traits for the identify call. This is required for scenarios where the user logs out of a session.

rudderClient.reset();

Enabling/disabling user tracking via the optOut API(GDPR support)

RudderStack gives the users (for example, an EU user) the ability to opt out of tracking any user activity until the user gives their consent. You can do this by leveraging RudderStack’s optOut API.

The optOut API takes true or false as a Boolean value to enable or disable tracking user activities. This flag persists across device reboots.

The following snippet highlights the use of the optOut API to disable user tracking:

rudderClient.optOut(true);

Once the user grants their consent, you can enable user tracking once again by using the optOut API with false as a parameter sent to it:

rudderClient.optOut(false);

The optOut API is available in the Flutter SDK starting from version 1.0.6.

Filtering events

When sending events to a destination via device mode, you can explicitly specify the events to be discarded or allowed to flow through by allowlisting or denylisting them.

Refer to the Client-side Event Filtering guide for more information on this feature.

Enabling/disabling events for specific destinations

The Flutter SDK lets you enable or disable sending events to a specific destination or all destinations connected to a source. You can specify these destinations by creating an object as shown in the following snippet:

RudderOption options = new RudderOption();
// default value for `All` is true
options.putIntegration("All", false);
// specifying destination by its display name
options.putIntegration("Mixpanel", false);
// specifying destination by its Factory object
options.putIntegrationWithFactory(Appcenter(), true);

The keyword All in the above snippet represents all destinations connected to a source. Its value is set to true by default.

Make sure the destination names that you pass while specifying the destinations exactly match the names as listed in the RudderStack dashboard.

You can pass the destinations to the SDK in the following two ways:

Method 1. Passing destinations while initializing the SDK

This is helpful when you want to enable/disable sending the events across all event calls made using the SDK to the specified destination(s).

rudderClient.initialize(<WRITE_KEY>,
                    config: builder.build(),options: options);

Method 2. Passing destinations while making event calls

This approach is helpful when you want to enable/disable sending only a particular event to the specified destination(s) or if you want to override the specified destinations passed with the SDK initialization for a particular event.

RudderProperty property = RudderProperty();
property.put("test_key_1", "test_key_1");
rudderClient.track("test_track_event", properties: property, options: options);

If you specify the destinations both while initializing the SDK as well as while making an event call, then the destinations specified at the event level only will be considered.

Setting a custom ID

You can pass a custom ID along with the standard userId in your identify calls. RudderStack adds this value under context.externalId.

RudderStack supports passing externalId only in the identify events. You must not pass this ID in other API calls like track, page, etc.

The following snippet shows how to add externalId to your identify event:

RudderOption option = RudderOption();
option.putExternalId("externalId", "some_external_id_1");
rudderClient.identify("1hKOmRA4GRlm", options: option);

Setting your own anonymousId using putAnonymousId

By default, RudderStack uses deviceId as anonymousId. You can use the following method to override and set your own anonymousId with the SDK:

rudderClient.putAnonymousId(<ANONYMOUS_ID>);

Setting the advertisement ID

RudderStack collects the advertisement ID only if autoCollectAdvertId is set to true during the SDK initialization:

final RudderController rudderClient = RudderController.instance;
MobileConfig mobileConfig = MobileConfig(autoCollectAdvertId: true);
RudderLogger.init(RudderLogger.VERBOSE);
RudderConfigBuilder builder = RudderConfigBuilder();
builder.withDataPlaneUrl(<DATA_PLANE_URL>);
builder.withTrackLifecycleEvents(true);
rudderClient.initialize(<WRITE_KEY>,config: builder.build());

You can use the putAdvertisingId method to pass your Android and iOS AAID and IDFA respectively.

The putAdvertisingId method accepts a string argument as listed below:

• id : Your Android advertisement ID (AAID) or your iOS advertisement ID (IDFA).

The following snippet highlights the use of putAdvertisingId():

rudderClient.putAdvertisingId(<ADVERTISING_ID>);

The id parameter that you pass in the putAdvertisingId method is assigned as the AAID (for Android) or as the IDFA (for iOS).

Setting the device token

You can pass your device token for push notifications to be passed to the destinations which support the Push Notification feature. RudderStack sets the token under context.device.token.

An example of setting the device token is as shown below:

rudderClient.putDeviceToken(<DEVICE_TOKEN>);

Self-hosted control plane

In case you are using a device mode destination like Adjust, Firebase, etc., the Flutter SDK needs to fetch the required configuration from the control plane. If you are using the Control plane lite utility to host your own control plane, then follow the steps in this section and specify controlPlaneUrl in your RudderConfig.Builder that points to your hosted source configuration file.

Do not pass the controlPlaneUrl parameter during SDK initialization if you are using RudderStack Cloud. This parameter is supported only if you are using the open-source Control plane lite utility to set up your own control plane.

Debugging

If you run into any issues when using the Flutter SDK, you can turn on the VERBOSE or DEBUG logging to determine the issue. To do so, follow these steps:

1. First, make sure you import RudderLogger by running the following command:

import 'package:rudder_sdk_flutter/RudderLogger.dart';

2. Then, turn on the logging by changing your rudderClient initialization as shown:

RudderConfigBuilder builder = RudderConfigBuilder();
builder.withDataPlaneUrl(DATA_PLANE_URL);
builder.withLogLevel(RudderLogger.VERBOSE);
rudderClient.initialize(WRITE_KEY,config: builder.build());

You can set the log level to one of the following values:

• NONE
• ERROR
• WARN
• INFO
• DEBUG
• VERBOSE

FAQ

How do I get the user traits after making an identify call?

You can get the user traits after making an identify call in the following way:

Map context = await rudderClient.getRudderContext();
print(context["traits"]);

Do I need to add anything to my Android ProGuard rules?

If you are facing any event delivery issues in your production environment, verify if you have added the following line in your ProGuard rules:

// Reporter Module
-keep class com.rudderstack.android.ruddermetricsreporterandroid.models.LabelEntity { *; }
-keep class com.rudderstack.android.ruddermetricsreporterandroid.models.MetricEntity { *; }
-keep class com.rudderstack.android.ruddermetricsreporterandroid.models.ErrorEntity { *; }

// Required for the usage off TypeToken class in Utils.converToMap, Utils.convertToList
-keep class com.google.gson.reflect.TypeToken { *; }
-keep class * extends com.google.gson.reflect.TypeToken

// Required for the serialization of SourceConfig once it is downloaded.
-keep class com.google.gson.internal.LinkedTreeMap { *; }
-keep class * implements java.io.Serializable { *; }
-keep class com.rudderstack.rudderjsonadapter.RudderTypeAdapter { *; }
-keep class * extends com.rudderstack.rudderjsonadapter.RudderTypeAdapter

// Required to ensure the DefaultPersistenceProviderFactory is not removed by Proguard 
// and works as expected even when the customer is not using encryption feature.
-dontwarn net.sqlcipher.Cursor
-dontwarn net.sqlcipher.database.SQLiteDatabase$CursorFactory
-dontwarn net.sqlcipher.database.SQLiteDatabase
-dontwarn net.sqlcipher.database.SQLiteOpenHelper
-keep class com.rudderstack.android.sdk.core.persistence.DefaultPersistenceProviderFactory { *; }

// Required for the usage of annotations across reporter and web modules
-dontwarn com.fasterxml.jackson.annotation.JsonIgnore
-dontwarn com.squareup.moshi.Json
-dontwarn com.fasterxml.jackson.annotation.JsonProperty

// Required for Device Mode Transformations
-keep class com.rudderstack.android.sdk.core.TransformationResponse { *; }
-keep class com.rudderstack.android.sdk.core.TransformationResponseDeserializer { *; }

Questions? Contact us by email or on Slack